Welcome To Our New Site

The Mini-Rooter drain machine clears lines from rooftop to basement, including kitchen, bath, and laundry. With 50 ft. of 1/2" cable, the Mini-Rooter weighs just 60 lbs.

This inexpensive, easy-to-use drain machine has lots of time-saving features. For instance, you can remove the cage in seconds for more portability or to switch to a different cable diameter - with no mess or lost time. Safety features include an air foot switch, ground fault circuit interrupter, and a safety slip clutch. An integral inner drum and distributor tube spring help prevent cable tangling under load

Clears 1-1/4" to 3" lines and most 4" lines.
Holds 75 ft. of 3/8" or 50 ft. of 1/2" Flexicore®
Open cage removes in seconds for more portability.
Safety slip clutch protects cable and operator.
Optional Power Cable Feed drives and retrieves cable.
Optional J-Drum holds 50 ft. of 1/4" or 5/16" cables.
1/3 hp motor with momentary contact reverse switch and pneumatic foot pedal.
Made in U.S.A.

Our M12™ Drain Snake is the ultimate service plumbing solution for tough jobs through 2-1/2 inch drain lines and weighing only 10 lbs., it's the lightest professional drain cleaner on the market. Its unique, hybrid design provides you with the benefits of both handheld and floor based drain cleaners in one machine. The tool's fixed drum shield with flat base protects you and fixtures while providing maximum tool support for easy cable feed. Plumbers, facility maintenance, and property managers will eliminate setup time when they switch from their corded drain cleaning machines to the MILWAUKEE® M12™ Drain Snake. The drain snake is powered by the REDLITHIUM™ Battery Pack (not included), giving you more work per charge and more work over pack life than the competitors. REDLINK™ Intelligence provides optimized performance and overload protection against abusive situations. This kit includes a 5/16" X 25’ bulb cable and 5 gallon drain snake storage bucket.

The 3-in-1 Portamatic SLT comes with a non- marring mallet, 3/4" pre-attached base plate, 1/2" interchangeable base plate, wrenches, goggles, pneumatic oil and rugged carrying case.

The SHF200 is SENCO’s mallet actuated pneumatic hardwood flooring nailer that provides consistent driving power for a flush, professional-quality instillation. This nailer drives 1-½" - 2" L-shaped cleat nails that hold the wood securely yet allow for seasonal expansion and contraction. The extra-long ergonomic handle is designed to mitigate user fatigue. The handle is also equipped with a safety trigger that prevents accidental ejection of fasteners if the tool is bumped or dropped. The SHF200 features an innovative non-marring base that easily adjusts between ½" and ¾" flooring without the use of tools.

This Louisville 12 foot non-conductive fiberglass step ladder has a load capacity of 300lbs, rated ANSI Type IA. This ladder is equipped with the new and innovative Raptor Top with magnet and multiple tool slots, SHOX impact absorption system, new Raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces, and double-rivet step construction. The Louisville FS1512 step ladder meets or exceeds the safety standards set by ANSI and OSHA.

FEATURES
Shox Impact Absorption System
Multifunctional Raptor Top With Multiple Tool Slots And Magnet
Raptor Boot With Slip-resistant Non-Marring Bonded Tread
Inside Spreader Braces
Double-Rivet Step Construction
Wide Back Braces

This Louisville 10 foot non-conductive fiberglass step ladder has a load capacity of 375lbs, rated ANSI Type IAA. This ladder is equipped with a heavy-duty gauge metal top, slip-resistant boot, inside spreader braces, heavy-duty gusset bracing, and double-rivet step construction. The Louisville FS1310HD step ladder meets or exceeds the safety standards set by ANSI and OSHA.

FEATURES
Heavy Gauge Metal Top
Slip-Resistant Boot
Heavy-Duty Gusset Bracing
Double-Rivet Step Construction
Inside Spreader Braces

This Louisville 32 foot fiberglass extension ladder has a 300 pounds. load capacity, rated ANSI Type IA. It is equipped with the MAXLOCK rung lock, custom engineered from a patented, advanced molecular polymer, MAXLOCK is the strongest, toughest, lightest rung lock ever made. This ladder also includes the patented QuickLatch system that provides a simple, intuitive method of securing the fly and base sections of the ladder when extended. The ladder features outside slide guides, D-shaped rungs fully serrated for a slip resistant surface, non-marring rail end caps, rope and pulley and steel swivel safety shoes with metal shield to be used with the tread down or in spike position. The Louisville FE3232 fiberglass extension ladder meets or exceeds the safety standards set by ANSI and OSHA.

This Louisville 24 foot fiberglass extension ladder has a 300 pounds. load capacity, rated ANSI Type IA. It is equipped with the MAXLOCK rung lock, custom engineered from a patented, advanced molecular polymer, MAXLOCK is the strongest, toughest, lightest rung lock ever made. This ladder also includes the patented QuickLatch system that provides a simple, intuitive method of securing the fly and base sections of the ladder when extended. The ladder features outside slide guides, D-shaped rungs fully serrated for a slip resistant surface, non-marring rail end caps, rope and pulley and steel swivel safety shoes with metal shield to be used with the tread down or in spike position. The Louisville FE3224 fiberglass extension ladder meets or exceeds the safety standards set by ANSI and OSHA.

Our Drywall Sander gives you 4.7 Amps of sanding power in a lightweight, 8.5-pound unit. This variable speed sander provides a range of 1400 to 2000 RPM and features a long, 13-foot static-dissipating vacuum hose to remove potentially harmful dust. This durable sander also features hook-and-loop straps for easy handling or attachment to an external vacuum.